Classes and Rules

Onroad Rules:

  • Cars must be in good shape.  Broken parts, torn chassis and generally hacked together cars that could cause damage to the facility will not be allowed.
  • Cars must have bodies (shells) on them at all times, absolutely no running without a body unless approved by ownership.
  • SXT or equivalent non citrus based traction compound only permitted.
  • One10 will only run a class if there is 5 cars or more of the same to create a heat.

Offroad Rules:

  • Cars must have chassis protection, this can be a decal that covers the entire bottom of the car or 3M film.  But it must cover every screw on the bottom of the car.
  • Cars must have shock tower protection.  A folded piece of lexan that covers the entire shock tower and shocks will be accepted.
  • Cars must be in nearly perfect condition.  No dirt, torn chassis, loose screws, or anything that could damage the track.
  • Cars must have a bumper that covers the front hinge pins of the car and wrap under the front of the car.  For example Mini-8 and Losi 22 both have metal with sharp edges at the front that can damage the carpet if the bumper is worn or broken.  These cars would need a modified bumper to work with the track.
  • Offroad cars are only allowed on the track during the allocated offroad days.
  • Wings must have folded edges, no freshly cut edges can be exposed.
  • Cars are to be driven with the intention to race not to bash.  If your driving is considered dangerous to people or the track you will be asked to leave for the night.
  • Any vehicle that is not considered an approved class will not be allowed to run.
  • When a car is broken the driver must stop immediately and the corner marshal must remove it from the track.
  • SXT or equivalent non citrus based traction compound only permitted.
  • Cars are to be approved by ownership before going on the track!!!

Class Rules

2wd Buggy:
  • 1/10 scale 2wd buggy with proper protection (Please read offroad rules)
  • 13.5 or 17.5 motor Roar approved
  • Roar Approved Blinky ESC
  • Hard case battery charged to 8.4 Volts max.
  • Pro-Line Racing Prime (Clay Compound) spec tire.  8242-17 Front Tires and 8241-17 Rear Tires.
  • 15mm minimum ride height
Touring Modified:
  • 1/10 scale 4wd touring cars
  • Open motor
  • Roar approved hard case battery charged to 8.4 Volts max
  • 1350 Grams Minimum weight
  • 5mm Ride height Minimum
  • Roar approved 190mm touring car body
Touring Stock “One10 Spec”:
  • 1/10 scale 4wd touring cars
  • 21.5 One10 Spec Motor Only
  • Roar approved Blinky ESC
  • Roar approved hard case battery charged to 8.4 Volts MAX
  • 1350 Grams Minimum weight
  • 5mm Ride height Minimum
  • Roar Approved 190mm Touring Car Body
USGT:
  • 1/10 scale 4wd/FWD touring cars
  • 21.5 Roar Approved motor
  • Roar Approved Blinky ESC
  • Roar approved hard case battery charged to 8.4 Volts max
  • 1450 Grams Minimum weight
  • Gravity / Ride USGT Approved tires
  • Any Body with exception of pancar bodies are permitted
  • 5mm Ride height Minimum
F1:
  • 1/10 scale F1 Cars
  • 21.5 Fixed timing motor
  • Roar Approved Blinky ESC
  • Roar approved hard case battery charged to 8.4 Volts max
  • 1050 Grams Minimum weight
  • 4mm Ride height Minimum
1/12 Stock:
  • 1/12 scale pan cars
  • 17.5 Roar Approved motor
  • Roar Approved Blinky ESC
  • Roar approved hard case battery charged to 4.2 Volts max
  • 1/12 spec tires (One10 marked only)
  • 730 Grams Minimum weight
  • 3mm Ride height Minimum
1/12 Modified:
  • 1/12 scale pan cars
  • Open motor
  • Roar approved 1S hard case
  • 730 Grams Minimum weight
  • 3mm Ride height Minimum
Tamiy Mini:
  • Tamiya M series mini
  • Spec (orange or blue) motor or silver can
  • Roar approved blinky ESC
  • Stock gearing and no speed gears
  • Roar approved 2S hard case charged to 8.4 max
  • Tamiya Branded tires
  • 1200 Grams Minimum weight
  • 3mm Ride height Minimum